| Date: | Wed, 10 Nov 1999 13:48:51 -0600 |
|---|
| Reply-To: | Max Martin <mmartin@EDGEWOOD-SA.K12.TX.US> |
|---|
| Sender: | "SPSSX(r) Discussion" <SPSSX-L@LISTSERV.UGA.EDU> |
|---|
| From: | Max Martin <mmartin@EDGEWOOD-SA.K12.TX.US> |
|---|
| Subject: | Re: Help Printing with Layers |
|---|
|
| Content-Type: | text/plain; charset="iso-8859-1" |
|---|
John
in the output viewer double-click your table to select it. Then click on
Format>Table Properties, and select the Printing tab. Check the "Print all
layers " checkbox, and finally OK, and you are all set.
HTH
Max Martin
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^ SAN ANTONIO SPURS RULE!
^ 1998-99 NBA CHAMPS
^ Go! Spurs Go!
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^ Dr. Max R. Martin
^ Senior Evaluator
^ Department of Research, Evaluation
^ Info Systems & Technology
^ Edgewood ISD
^ 4127 Eldridge
^ San Antonio, TX 78237
^ Vox: 210-431-9120 FAX: 210-433-5134
^ e-mail: mmartin@edgewood-sa.k12.tx.us
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
----- Original Message -----
From: John Fitzgibbon <john.fitzgibbon@METC.STATE.MN.US>
Newsgroups: bit.listserv.spssx-l
To: <SPSSX-L@LISTSERV.UGA.EDU>
Sent: Wednesday, November 10, 1999 12:17 PM
Subject: Help Printing with Layers
> Dear List:
>
> Is there an easy way to print all the layers in a table? I have 31 layers
and don't desire to spend a lot of time printing them.
>
> Thanks!
>
> John P. FitzGibbon 612-349-7574
> Transit Operations Analyst
> Metro Transit, Minneapolis, Minnesota
>
> Visit our web site: www.metrotransit.org
>
| 
