Subject: | |
From: | |
Reply To: | |
Date: | Thu, 20 Feb 2003 10:38:47 +0800 |
Content-Type: | multipart/mixed |
Parts/Attachments: |
|
|
Dear all,
I am running CERES-Rice model.
The attached file is a part of WATER.OUT.
Please note the column of SWXD and DRNC.
First 8 days, the SWXD is the same value because there is 10 mm of
pudding water.
It is OK.
But from 10th to 15th day, the model force to drain water from the soil
until
the soil water equal to drain upper limite.
Model's result also show that there is water stress during these time.
I have set drainage type = DR000, no drainage.
How can I avoid this happened?
Thanks for your patience.
Regards,
Kang
@DATE CDAY EPAA ETAA EOAA SWXD ROFC DRNC PREC IRRC SRAA TMXA TMNA
95054 0 .00 1.32 1.32 513.3 .0 .0 0 269 5.7 19.6 14.5
95055 1 1.20 1.20 1.20 513.3 .0 .0 0 269 6.1 19.4 14.0
95056 2 .59 .59 .59 513.3 .0 .0 0 269 3.1 17.6 12.6
95057 3 1.50 1.51 1.51 513.3 .0 .0 0 269 7.8 19.2 12.0
95058 4 .62 .62 .62 513.3 .0 .0 0 269 3.3 16.8 12.4
95059 5 1.23 1.23 1.23 513.3 .0 .0 0 269 6.4 20.6 9.8
95060 6 .26 .26 .26 513.3 .0 .0 0 269 1.4 14.6 12.9
95061 7 .33 .33 .33 513.3 .0 .0 0 269 1.7 17.8 13.7
95062 8 2.64 2.65 2.65 513.3 .0 .0 0 269 13.3 21.7 11.9
95063 9 2.78 2.79 2.79 510.8 .0 .0 0 269 14.5 19.8 10.7
95064 10 2.88 2.94 2.94 382.2 .0 125.6 0 269 15.3 21.5 7.9
95065 11 .66 .67 .67 318.9 .0 188.2 0 269 3.6 17.2 11.0
95066 12 2.57 2.62 2.62 284.7 .0 219.9 0 269 12.8 24.3 11.0
95067 13 2.70 2.75 2.75 266.5 .0 235.2 0 269 13.0 25.5 13.5
95068 14 2.84 2.90 2.90 255.9 .0 243.0 0 269 12.8 30.2 15.1
95069 15 2.34 2.39 2.39 249.9 .0 246.6 0 269 10.9 25.9 17.2
95070 16 1.39 1.42 1.42 248.5 .0 246.6 0 269 6.5 26.8 15.2
95071 17 1.32 1.35 1.35 247.1 .0 246.6 0 269 6.5 23.2 14.2
95072 18 .11 .11 .11 247.0 .0 246.6 0 269 .6 16.3 12.1
|
|
|