5 messages.--------------------------Johnnie ----------------------------------------------------------------- Moderator Note: I would like to add a little warning about the case weight loads found in the literature. They are mainly averages done with a specific number of maps per drawer, usually the recommended 200 sheets. Actual maximum load can be higher. Here at Georgia I have five high case stacks and some archival storage stacks with over 12,000 maps per standard case stack footprint The cases with the NOAA charts are well over 300 lb/sq ft. Jim Minton at Tennessee has given me figures of over 340 lb for some of his case stacks. Johnnie Sutherland University of Georgia ----------------------------------------- >Date: Thu, 21 Nov 96 09:11:43 EST >From: Helen <[log in to unmask]> >Subject: Map Case Weight >To: [log in to unmask] The question concerning map and map case weights was addressed in a classic article by Catherine Bahn, Library of Congress Geography and Map Division. It originally appeared in the Special Libraries Association, Geography and Map Division "Bulletin" No.46 (1961), pp.3-17. It was later reprinted in "MAP LIBRARIANSHIP: Readings" compiled by Roman Drazniowsky and published in 1975. Both are titled "Map Libraries--Space and Equipment" The map space estimates were also addressed in "MAP LIBRARIANSHIP: Readings" by Mary Galneder, Univ- ersity of Wisconsin in her article "Storage and Preservation". Mary's article was reprinted from "Special Libraries" vol.61, no.6(1970). pp.271-274. In "Map Librarianship", Mary Larsgaard" cites these article but does not reprint any of the information. The article by Catherine Bahn was been extremely useful to many map librarians. It has a number of well organized tables that can help one to quickly answer a potential map space or map case weight problem. There are a number of map libraries in New York state which should have either the journal and/or the Drazniowsky book. HelenJane Armstrong, Head Map & Imagery Library, University of Florida ------------------------------------------------------- >Date: Wed, 20 Nov 1996 16:18:03 -0800 (PST) >From: Frances Woodward <[log in to unmask]> >Subject: Re: Map case weight (fwd) I was looking for this recently, as there is a question of the map library being moved to an area which we don't think has adequate floor load capacity. Here are a few references: Beverly CHEN, "Map library design: guidelines, ideas, tips and pitfalls," ACMLA Bulletin, no. 89 (Dec. 1993); Catherine BAHN, "Map libraries - space and equipment," SLA G&M Division Bulletin, no. 46 (Dec. 1961); Mary GALNEDER, "Equipment for map libraries," Special Libraries, v. 61 no. 6 (1970). I would be interested in adding additional references if anyone has some at hand. Good luck. Fran On Wed, 20 Nov 1996, Kathryn Womble wrote: > ----------------------------Original message---------------------------- > Someone in my library forwarded this to me and I can't answer it. Anyone > else? Kathryn > ---------- Forwarded message ---------- > Date: Mon, 18 Nov 1996 15:16:42 -0600 > From: Donna Burton <[log in to unmask]> > Reply-To: Discussion of Government Document Issues > <[log in to unmask]> > To: Multiple recipients of list GOVDOC-L <GOVDOC-L@PSUVM> > Subject: Map case weight > > We have a new building going up on campus that may end up housing our > depository map collection and the geology professor coordinating the > project portion of this is wondering what the load would be for flat > map files. I was able to find the tare (empty) weight of a set of 5 > drawer flat files based on the shipping weight, but I don't have any > idea how to calculate how much (or how much more) said files would > weigh when they are stocked with topo maps. Does anyone have or has > anyone done calculations for this type of question or can someone tell > me where to look? Any and all suggestions would be welcome. Thanks > in adavance..... > > Donna Burton > Schaffer Library, Union College > Schenectady, NY > [log in to unmask] > ************************************************************************** Frances Woodward, Special Collections & University Archives Division, Main Library, University of British Columbia, 1956 Main Mall, Vancouver, B.C. V6T 1Z1 Tel: (604) 822-2819 Fax: (604) 822-9587 E-mail: [log in to unmask] URL: http://www.library.ubc.ca/spcoll/ ************************************************************************** ------------------------------------------------------------- >Date: Thu, 21 Nov 96 09:16:14 CST >From: "Arlyn Sherwood" <[log in to unmask]> >Subject: Re: Map case weight (fwd) There's been a lot of literature over the years on moving map collections, especially in the SLA G&M Bulletin, which probably gives this figure. But our stacks, which includes the map cabinet rooms, were built to the spec of being able to hold 200 pounds per square foot, I think, and we're still on the 3rd and 4th floors after 6 years. ------------------------------------------------- >Date: Thu, 21 Nov 1996 13:12:00 -0800 >Subject: Re: Map case weight (fwd) KI--i answered her direct (i.e. fill one drawer with maps, take them to a scale, weigh yourself holding the maps, then subtract your weight, multiply net times number of drawers. add cabinet weight as given by manufacturer. divide total by footprint to get lds/sq ft--this is max value; actually load is spread over the entire map area). because of needed drawer clearances, it was impossible for us to exceed modern standard bldg specs for load with map cases. microfilm/microfiche cabinets, on the other hand, were way over the limits. LC