> ---------- > From: William Clendenin[SMTP:[log in to unmask]] > Sent: donderdag 8 oktober 1998 5:28 > To: [log in to unmask] > Subject: Fossil Preservation > > Questions for you fossil experts: > > I have a lot of small fossils I dug from the clay banks on Morningside > Peninsula, Victoria, Australia. They are very fragile and the color of > the clay from which they came. > > 1. Should I try to clean or bleach them? > > 2. Should I apply a coating to strengthen them? > > Bill Clendenin > Sarasota, Florida > Dear Bill, You will have to clean them, not to bleach. Cleaning is best done by drying the clay, and when fossil and clay is dry, put it in warm water with some soap or sythetical detergent. wash the fosiils there after with some water in order to remove the soap. If necessary I treat the fossils with a solution of a plastic glue in acetone. NB. the fossiles must becompletely dry when you treat them with the glue solution. If your fossil is in several pieces, clean all the peices and treat them as stated above. Then you can glue the pieces to rfeconstruct the fossil. When the clay is hard to remove you can use a solution of 3% H2O2, but again your clay must be dry before you put the fossil in this solution. be sure there is no pyrite (FeS2) in the shell! this reacts with H2O2 and produses sulfuric acid, which react with your fossil. Goog Luck! Martin Cadee Klimroos 35 2317 GD Leiden The Netherlands [log in to unmask]